GE FANUC IC693CPU363-BG CPU MODULE

Description: Product DescriptionThe GE Fanuc IC693CPU363 is a Module of GE Fanuc series 90-30 PLC systems. It connects to one of the CPU slots on a baseplate. This CPU is of type 80386X and has a speed of 25Mz. It gives the baseplate the ability to connect to up to seven remote or expansion baseplates. The power required for it to work is +5VDC and 890mA current. It has a battery to back up a clock and can be overridden. When it operates, its temperature can vary from 0 to 60 degrees in ambient mode.GE Fanuc IC693CPU363 module has three ports. The first port supports SNP or SNPX slave on the power connector. The two other ports support SNP or SNPX master and slave, and RTU slave. It is also compatible with RTU master and CCM Modules. To support RTU master, a PCM module is needed. Connectivity is also provided by a LAN port that supports FIP, Profibus, GBC, GCM, and GCM+ modules. It also supports multidrop.The total user memory of the GE Fanuc IC693CPU363 module is 240 kilobytes and the typical scan rate of 1 kilobyte of logic is 0.22 milliseconds. It has 2048 input (%I) and 2048 output (%Q) points. The discrete global memory (%G) of the CPU is 1280 bits. Internal Coils (%M) take a space of 4096 bits and Output or temporary Coils (%T) deploy 256 bits. System Status Referenced (%S) use 128 bits.The Register Memory (%R) can be configured with either Logicmaster or Control v2.2. Logicmaster configures the GE Fanuc IC693CPU363 Module memory in 128 word increments up to 16,384 words. Control v2.2 can do the same configuration deploying up to 32,640 words. Analog inputs (%AI) and outputs (%Q) can be configured exactly like the Register Memory using the same programs. GE Fanuc IC693CPU363 has system registers that consist of 28 words. Technical SpecificationsProcessor Speed :25 MHzI/O Points :2048Register Memory :240KBytesFloating Point Math: Yes32 BIT system Processor:80386EX The GE Fanuc IC693CPU363 CPU module is manufactured as a member of the GE Fanuc Series 90-30 product line. It has a 25-Megahertz processor speed and 2 serial ports. This CPU module supports the use of the 80386EX microprocessor, which offers all the fundamental functions and sweep control options, and it also helps to execute the non-Boolean functions. It comes with a user memory capacity of 240 KB, 2048 discrete inputs, and 2048 discrete outputs. The IC693CPU363 CPU module features a discrete global memory with a rating of 1280 bits, while the internal coils have a rating of 4096 bits. This module has 128 bits that are used for the reference of different statuses, with 256 bits of output or temporary coils. It has analog inputs, analog outputs, and a register memory capacity ranging between 128 and 32640 words with the control version, and a range of 128 to 16384 words with the Logicmaster. The system registers of this CPU module are allocated with 28 words.The GE Fanuc Series 90-30 IC693CPU363 CPU module comes with 3 built-in serial ports which are accessible through the power supply connector, and it also supports the use of the SNP and SNPX slave protocols. There is a 15-pin D-type female connector through which the serial port can be accessed, and it is located on the right front side of the power supply module. The serial port is used for the connection of the PC which runs the GE Fanuc hand-held monitor programming software. The IC693CPU363 CPU module can also be used with the optional Profibus and Ethernet communication modules. This CPU module supports the use of the periodic subroutine functionality. It meets the CE and cUL standards.

Price: 637 USD

Location: SILVASSA, DADRA & NAGAR HAVELI

End Time: 2025-02-02T10:42:44.000Z

Shipping Cost: 0 USD